{"title":"Chillers","description":"\u003cp\u003eCooling units on their own, for a tub, barrel or stock tank you already have. Capacity runs from 5,000 to 15,000 BTU\/hr, and sizing is the whole decision: too small and it runs constantly without holding the number you want. Send us your volume and where it sits and we will tell you straight.\u003c\/p\u003e\u003cp\u003eWant the tub and the chiller together? See \u003ca href=\"\/collections\/cold-plunge\"\u003eCold Plunges\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"penguin-half-hp-water-chiller","title":"½ HP Water Chiller, 5,000 BTU","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\u003cp\u003e\u003cem\u003eThe entry point, and the one to size carefully.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e5,000 BTU\/hr in the smallest cabinet Penguin builds, 39 lb and 16.25 inches wide. It is the cheapest way into a proper chilled plunge, and it is also the unit most often bought a size too small.\u003c\/p\u003e\u003cp\u003eIt suits a small insulated tub indoors. If your tub is over about 100 gallons, sits outside, or catches afternoon sun, the high efficiency ½ HP or a 1 HP will hold temperature where this one will run continuously and still drift.\u003c\/p\u003e\u003ch6\u003eKey Features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5,000 BTU\/hr.\u003c\/strong\u003e The entry capacity in the range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110 to 120V, 3.9A.\u003c\/strong\u003e Standard socket, 450W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e39 lb.\u003c\/strong\u003e The smallest and lightest cabinet Penguin makes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital controller.\u003c\/strong\u003e Front mounted, sets and holds a target temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16.25 in wide.\u003c\/strong\u003e Fits beside a tub without a platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Tennessee.\u003c\/strong\u003e Penguin builds these in Knoxville.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-year warranty.\u003c\/strong\u003e Manufacturer parts and labour cover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003e5,000 BTU\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e16.25″ W × 14.75″ D × 12″ H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e39 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e110 to 120V, 3.9A, 450W, single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch6\u003eBefore you order\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis is the one people under-size.\u003c\/strong\u003e Good for a small, well insulated, indoor tub. Over roughly 100 gallons, or outdoors, step up. Tell us the volume and where it sits and we will tell you straight whether this is enough.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo pump in the box.\u003c\/strong\u003e This is the chiller alone. A plunge build also needs a pump and tubing, and Penguin's own accessory pump package is not rated for cold therapy use. Tell us your tub and we will spec the pump before you order rather than after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower.\u003c\/strong\u003e 3.9A on a standard socket. Not on an extension lead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelivery.\u003c\/strong\u003e Ships free to the contiguous 48 states from Penguin's Tennessee factory.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eYou will also need a pump\u003c\/h6\u003e\n\u003cp\u003eA chiller does not circulate water on its own. It needs a pump to move water between the chiller and your plunge.\u003c\/p\u003e\n\u003cp\u003eWe recommend running the pump submersed. Submersed operation keeps the pump primed, runs quieter, and puts no load on the pump inlet. It can also be plumbed in line. If you do, hand-tighten the fitting at the inlet, do not force it, and support the weight of the pipework so it does not bear on the pump body. The inlet is the part most likely to be damaged by an over-tightened or unsupported fitting.\u003c\/p\u003e\n\n\u003ch6\u003eReturns and delivery\u003c\/h6\u003e\n\u003cp\u003eChange-of-mind returns accepted within \u003cstrong\u003e21 days of dispatch\u003c\/strong\u003e, subject to a \u003cstrong\u003e20% restocking fee\u003c\/strong\u003e, which is what Penguin Chillers charge us. Return freight is arranged by us and charged to you at cost, and you will have the exact figure in writing before anything is booked. Custom-configured units cannot be returned.\u003c\/p\u003e\n\u003cp\u003eDamage in transit and manufacturing defects are covered in full at our cost.\u003c\/p\u003e\n","brand":"Penguin Chillers","offers":[{"title":"Default Title","offer_id":56189044785537,"sku":"PNG-WC05","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/5751\/7697\/files\/amber-ice-penguin-half-hp-water-chiller-front.jpg?v=1787940859"},{"product_id":"penguin-cold-therapy-chiller","title":"Cold Therapy Chiller, 7,500 BTU","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\u003cp\u003e\u003cem\u003eThe chiller that turns a tub you already own into a plunge.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e7,500 BTU\/hr with the pump built into the same box, which is the part that matters. Most chillers at this size expect you to buy and plumb a separate pump, and that is where a first build usually goes wrong. This one arrives as a single unit with 3\/4 inch camlocks on the inlet and outlet.\u003c\/p\u003e\u003cp\u003eTitanium coil, R-32 refrigerant, and it is rated for outdoor siting above freezing. 49 lb and 17 inches wide, so it fits beside a stock tank or a barrel without a platform. 56 dBA, which is roughly a fridge, but site it where that is acceptable.\u003c\/p\u003e\u003ch6\u003eKey Features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7,500 BTU\/hr.\u003c\/strong\u003e Sized for a single-person tub of roughly 80 to 100 gallons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in pump.\u003c\/strong\u003e One box, one plug. No separate pump to buy or plumb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4 in camlocks.\u003c\/strong\u003e Tool free connections that break for winter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium coil.\u003c\/strong\u003e The metal in contact with the water, so it resists corrosion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor rated.\u003c\/strong\u003e Above 32°F ambient. Drain it if it will freeze.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e56 dBA.\u003c\/strong\u003e About the level of a domestic fridge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110 to 120V, 3.9A.\u003c\/strong\u003e Plugs into a standard socket on a 6 ft cord.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-year warranty.\u003c\/strong\u003e Manufacturer parts and labour cover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003e7,500 BTU\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat exchanger\u003c\/th\u003e\n\u003ctd\u003eTitanium coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePump\u003c\/th\u003e\n\u003ctd\u003eBuilt in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e3\/4 in camlocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRefrigerant\u003c\/th\u003e\n\u003ctd\u003eR-32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e17″ W × 15″ L × 13″ H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e49 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e110 to 120V, 3.9A, 450W, single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCord length\u003c\/th\u003e\n\u003ctd\u003e6 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSound\u003c\/th\u003e\n\u003ctd\u003e56 dBA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutdoor rated\u003c\/th\u003e\n\u003ctd\u003eYes, above 32°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch6\u003eBefore you order\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatch it to your tub.\u003c\/strong\u003e 7,500 BTU suits a single-person tub around 80 to 100 gallons. Tell us your volume and how cold you want to hold it and we will confirm the sizing before you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe install kit is optional.\u003c\/strong\u003e It adds a 150 micron washable filter, two 6 ft lengths of 3\/4 in tubing, bulkheads, clamps and barbed elbows. The bulkheads only fit a tub wall of 1\/4 in or less, so check yours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower.\u003c\/strong\u003e 110 to 120V, 3.9A on a 6 ft cord. Do not run it on an extension lead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSiting.\u003c\/strong\u003e It produces condensation. Put it somewhere that can get wet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFreezing.\u003c\/strong\u003e Outdoor rated above 32°F only. Disconnect and drain it below that.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eYou will also need a pump\u003c\/h6\u003e\n\u003cp\u003eA chiller does not circulate water on its own. It needs a pump to move water between the chiller and your plunge.\u003c\/p\u003e\n\u003cp\u003eWe recommend running the pump submersed. Submersed operation keeps the pump primed, runs quieter, and puts no load on the pump inlet. It can also be plumbed in line. If you do, hand-tighten the fitting at the inlet, do not force it, and support the weight of the pipework so it does not bear on the pump body. The inlet is the part most likely to be damaged by an over-tightened or unsupported fitting.\u003c\/p\u003e\n\n\u003ch6\u003eReturns and delivery\u003c\/h6\u003e\n\u003cp\u003eChange-of-mind returns accepted within \u003cstrong\u003e21 days of dispatch\u003c\/strong\u003e, subject to a \u003cstrong\u003e20% restocking fee\u003c\/strong\u003e, which is what Penguin Chillers charge us. Return freight is arranged by us and charged to you at cost, and you will have the exact figure in writing before anything is booked. Custom-configured units cannot be returned.\u003c\/p\u003e\n\u003cp\u003eDamage in transit and manufacturing defects are covered in full at our cost.\u003c\/p\u003e\n","brand":"Penguin Chillers","offers":[{"title":"Chiller only","offer_id":56189045080449,"sku":"PNG-CTC","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Chiller with install and filter kit","offer_id":56189045113217,"sku":"PNG-CTC-KIT","price":2299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/5751\/7697\/files\/amber-ice-penguin-cold-therapy-chiller-beside-plunge.jpg?v=1787940890"},{"product_id":"penguin-barrel-chiller-cold-therapy-package","title":"Barrel Chiller Cold Therapy Package","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\u003cp\u003e\u003cem\u003eFor a barrel you already own. The barrel is not in the box.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eThe same 7,500 BTU Cold Therapy Chiller, supplied with the bracket, hoses and fittings that attach it to an Ice Barrel. If you already have the barrel, this is the cheapest route to a plunge that holds temperature without ice runs.\u003c\/p\u003e\u003cp\u003eTwo kits exist because the barrel sizes differ. Pick the 300 or 500 kit, or the 400 kit, to match what you own. Getting this wrong means fittings that do not seat, so check the model number on your barrel before you order rather than after.\u003c\/p\u003e\u003ch6\u003eKey Features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7,500 BTU\/hr chiller.\u003c\/strong\u003e Titanium coil with the pump built in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarrel mounting hardware.\u003c\/strong\u003e Bracket, hoses and quick connect fittings included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo kit options.\u003c\/strong\u003e 300 or 500, and 400. Match it to the barrel you own.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 micron filter.\u003c\/strong\u003e Washable and reusable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug and play.\u003c\/strong\u003e No tools needed for the connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor rated.\u003c\/strong\u003e Above 32°F ambient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110 to 120V, 3.9A.\u003c\/strong\u003e Standard socket, 6 ft cord.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-year warranty.\u003c\/strong\u003e Manufacturer parts and labour cover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003e7,500 BTU\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat exchanger\u003c\/th\u003e\n\u003ctd\u003eTitanium coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePump\u003c\/th\u003e\n\u003ctd\u003eBuilt in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e3\/4 in camlocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRefrigerant\u003c\/th\u003e\n\u003ctd\u003eR-32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiltration\u003c\/th\u003e\n\u003ctd\u003e150 micron, washable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e17″ W × 15″ L × 13″ H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e49 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e110 to 120V, 3.9A, 450W, single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCord length\u003c\/th\u003e\n\u003ctd\u003e6 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSound\u003c\/th\u003e\n\u003ctd\u003e56 dBA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch6\u003eBefore you order\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe barrel is not included.\u003c\/strong\u003e This is the chiller and the hardware to connect it. You supply the Ice Barrel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck your barrel model first.\u003c\/strong\u003e The 300\/500 kit and the 400 kit use different fittings. Tell us the model if you are unsure and we will confirm before the order goes in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower.\u003c\/strong\u003e 110 to 120V, 3.9A on a 6 ft cord. Not on an extension lead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSiting.\u003c\/strong\u003e Condensation is normal. Site it where water will not do damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFreezing.\u003c\/strong\u003e Rated above 32°F. Disconnect and drain it below that.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eYou will also need a pump\u003c\/h6\u003e\n\u003cp\u003eA chiller does not circulate water on its own. It needs a pump to move water between the chiller and your plunge.\u003c\/p\u003e\n\u003cp\u003eWe recommend running the pump submersed. Submersed operation keeps the pump primed, runs quieter, and puts no load on the pump inlet. It can also be plumbed in line. If you do, hand-tighten the fitting at the inlet, do not force it, and support the weight of the pipework so it does not bear on the pump body. The inlet is the part most likely to be damaged by an over-tightened or unsupported fitting.\u003c\/p\u003e\n\n\u003ch6\u003eReturns and delivery\u003c\/h6\u003e\n\u003cp\u003eChange-of-mind returns accepted within \u003cstrong\u003e21 days of dispatch\u003c\/strong\u003e, subject to a \u003cstrong\u003e20% restocking fee\u003c\/strong\u003e, which is what Penguin Chillers charge us. Return freight is arranged by us and charged to you at cost, and you will have the exact figure in writing before anything is booked. Custom-configured units cannot be returned.\u003c\/p\u003e\n\u003cp\u003eDamage in transit and manufacturing defects are covered in full at our cost.\u003c\/p\u003e\n","brand":"Penguin Chillers","offers":[{"title":"300 or 500 kit","offer_id":56189045145985,"sku":"PNG-BARREL-300500","price":2399.0,"currency_code":"USD","in_stock":true},{"title":"400 kit","offer_id":56189045178753,"sku":"PNG-BARREL-400","price":2399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/5751\/7697\/files\/amber-ice-penguin-barrel-chiller-package-two-barrels-outdoor.jpg?v=1787940902"},{"product_id":"penguin-1-5-hp-water-chiller","title":"1½ HP Water Chiller, 15,000 BTU","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\u003cp\u003e\u003cem\u003eThe one for a tub too big for a 1 HP.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e15,000 BTU\/hr, which is where you end up once the tub is over about 150 gallons or two people are using it in the same session. Half the reason a plunge disappoints is a chiller that cannot pull the heat out faster than the room puts it back, and that shows up worst on the biggest tubs.\u003c\/p\u003e\u003cp\u003eTwo exchanger options. The PVC shell with a titanium coil is the standard build and it is fine for fresh water. The 316 stainless shell and coil costs $300 more and is the one to take if the water is salted, heavily treated, or the unit lives outdoors near the coast.\u003c\/p\u003e\u003ch6\u003eKey Features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15,000 BTU\/hr.\u003c\/strong\u003e Sized for large single tubs or two-person use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo exchanger builds.\u003c\/strong\u003e PVC with titanium coil, or full 316 stainless.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110 to 120V.\u003c\/strong\u003e No 240V supply needed at this capacity, which is unusual.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital controller.\u003c\/strong\u003e Front mounted, sets and holds a target temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e96 lb.\u003c\/strong\u003e Freestanding. No mounting frame required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Tennessee.\u003c\/strong\u003e Penguin builds these in Knoxville.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-year warranty.\u003c\/strong\u003e Manufacturer parts and labour cover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003e15,000 BTU\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat exchanger\u003c\/th\u003e\n\u003ctd\u003ePVC with titanium coil, or 316 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e26.50″ W × 23.75″ D × 18″ H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e96 lb, or 100 lb in 316 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e110 to 120V, 11A, 1,270W, single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch6\u003eBefore you order\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower, and read this one.\u003c\/strong\u003e 11A on a 110 to 120V supply, running continuously. That is above the 12A continuous limit a standard 15A circuit is rated for once you allow headroom, so give it a dedicated 20A circuit. Sharing it with anything else is how the breaker trips mid-session.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo pump in the box.\u003c\/strong\u003e This is the chiller alone. A plunge build also needs a pump and tubing, and Penguin's own accessory pump package is not rated for cold therapy use. Tell us your tub and we will spec the pump before you order rather than after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSiting.\u003c\/strong\u003e 96 lb, and it throws warm air and condensation. It needs space around it and a surface that can get wet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelivery.\u003c\/strong\u003e Ships free to the contiguous 48 states from Penguin's Tennessee factory.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eYou will also need a pump\u003c\/h6\u003e\n\u003cp\u003eA chiller does not circulate water on its own. It needs a pump to move water between the chiller and your plunge.\u003c\/p\u003e\n\u003cp\u003eWe recommend running the pump submersed. Submersed operation keeps the pump primed, runs quieter, and puts no load on the pump inlet. It can also be plumbed in line. If you do, hand-tighten the fitting at the inlet, do not force it, and support the weight of the pipework so it does not bear on the pump body. The inlet is the part most likely to be damaged by an over-tightened or unsupported fitting.\u003c\/p\u003e\n\n\u003ch6\u003eReturns and delivery\u003c\/h6\u003e\n\u003cp\u003eChange-of-mind returns accepted within \u003cstrong\u003e21 days of dispatch\u003c\/strong\u003e, subject to a \u003cstrong\u003e20% restocking fee\u003c\/strong\u003e, which is what Penguin Chillers charge us. Return freight is arranged by us and charged to you at cost, and you will have the exact figure in writing before anything is booked. Custom-configured units cannot be returned.\u003c\/p\u003e\n\u003cp\u003eDamage in transit and manufacturing defects are covered in full at our cost.\u003c\/p\u003e\n","brand":"Penguin Chillers","offers":[{"title":"PVC shell with titanium coil","offer_id":56189045244289,"sku":"PNG-WC15-TI","price":2799.0,"currency_code":"USD","in_stock":true},{"title":"316 stainless shell and coil","offer_id":56189045277057,"sku":"PNG-WC15-316","price":3099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/5751\/7697\/files\/amber-ice-penguin-1-5-hp-water-chiller-front.jpg?v=1787940873"},{"product_id":"penguin-1-hp-he-water-chiller","title":"1 HP High Efficiency Water Chiller, 11,500 BTU","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\u003cp\u003e\u003cem\u003eFifteen percent more cooling than the standard 1 HP, on the same plug.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e11,500 BTU\/hr against the standard 1 HP's 10,000, from the same 7.2A draw and the same footprint. The extra comes from a larger coil rather than a bigger compressor, which is why the electrical requirement does not move and the cabinet is the same size.\u003c\/p\u003e\u003cp\u003eThat makes it the better buy at $100 more if the tub is at the top of what a 1 HP handles, or if the plunge lives somewhere warm where the chiller has to work against ambient heat all day.\u003c\/p\u003e\u003ch6\u003eKey Features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e11,500 BTU\/hr.\u003c\/strong\u003e 15 percent more capacity than the standard 1 HP unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame 7.2A draw.\u003c\/strong\u003e No electrical upgrade over the standard 1 HP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo exchanger builds.\u003c\/strong\u003e PVC with titanium coil, or full 316 stainless.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital controller.\u003c\/strong\u003e Front mounted, sets and holds a target temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 lb.\u003c\/strong\u003e Freestanding, 19.25 in wide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Tennessee.\u003c\/strong\u003e Penguin builds these in Knoxville.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-year warranty.\u003c\/strong\u003e Manufacturer parts and labour cover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003e11,500 BTU\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat exchanger\u003c\/th\u003e\n\u003ctd\u003ePVC with titanium coil, or 316 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e19.25″ W × 19.75″ D × 14.25″ H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e60 lb, or 66 lb in 316 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e110 to 120V, 7.2A, 830W, single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch6\u003eBefore you order\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower.\u003c\/strong\u003e 7.2A on a standard 110 to 120V socket. It runs continuously, so do not share the circuit with a dryer, an oven or a second chiller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo pump in the box.\u003c\/strong\u003e This is the chiller alone. A plunge build also needs a pump and tubing, and Penguin's own accessory pump package is not rated for cold therapy use. Tell us your tub and we will spec the pump before you order rather than after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSiting.\u003c\/strong\u003e It exhausts warm air. In a small enclosed room it will fight itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelivery.\u003c\/strong\u003e Ships free to the contiguous 48 states from Penguin's Tennessee factory.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eYou will also need a pump\u003c\/h6\u003e\n\u003cp\u003eA chiller does not circulate water on its own. It needs a pump to move water between the chiller and your plunge.\u003c\/p\u003e\n\u003cp\u003eWe recommend running the pump submersed. Submersed operation keeps the pump primed, runs quieter, and puts no load on the pump inlet. It can also be plumbed in line. If you do, hand-tighten the fitting at the inlet, do not force it, and support the weight of the pipework so it does not bear on the pump body. The inlet is the part most likely to be damaged by an over-tightened or unsupported fitting.\u003c\/p\u003e\n\n\u003ch6\u003eReturns and delivery\u003c\/h6\u003e\n\u003cp\u003eChange-of-mind returns accepted within \u003cstrong\u003e21 days of dispatch\u003c\/strong\u003e, subject to a \u003cstrong\u003e20% restocking fee\u003c\/strong\u003e, which is what Penguin Chillers charge us. Return freight is arranged by us and charged to you at cost, and you will have the exact figure in writing before anything is booked. Custom-configured units cannot be returned.\u003c\/p\u003e\n\u003cp\u003eDamage in transit and manufacturing defects are covered in full at our cost.\u003c\/p\u003e\n","brand":"Penguin Chillers","offers":[{"title":"PVC shell with titanium coil","offer_id":56189045309825,"sku":"PNG-WCHE1-TI","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"316 stainless shell and coil","offer_id":56189045342593,"sku":"PNG-WCHE1-316","price":2499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/5751\/7697\/files\/amber-ice-penguin-1-hp-he-water-chiller-front.jpg?v=1787940870"},{"product_id":"penguin-1-hp-water-chiller","title":"1 HP Water Chiller, 10,000 BTU","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\u003cp\u003e\u003cem\u003eThe middle of the range, and the one most plunges actually need.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e10,000 BTU\/hr, which covers a normal single-person tub of roughly 100 to 150 gallons held in the high thirties. Below that you are paying for capacity you will not use, and above it the pull-down time gets long enough to notice.\u003c\/p\u003e\u003cp\u003eThe exchanger choice is the only real decision. PVC shell with a titanium coil is the standard build. The 316 stainless shell and coil is $300 more and worth it if the water is treated, salted, or the chiller sits outdoors in a corrosive spot.\u003c\/p\u003e\u003ch6\u003eKey Features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10,000 BTU\/hr.\u003c\/strong\u003e Sized for a standard single-person plunge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo exchanger builds.\u003c\/strong\u003e PVC with titanium coil, or full 316 stainless.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110 to 120V, 7.2A.\u003c\/strong\u003e Standard domestic socket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital controller.\u003c\/strong\u003e Front mounted, sets and holds a target temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e58 lb.\u003c\/strong\u003e Freestanding, 19.25 in wide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Tennessee.\u003c\/strong\u003e Penguin builds these in Knoxville.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-year warranty.\u003c\/strong\u003e Manufacturer parts and labour cover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003e10,000 BTU\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat exchanger\u003c\/th\u003e\n\u003ctd\u003ePVC with titanium coil, or 316 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e19.25″ W × 19.75″ D × 14.25″ H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e58 lb, or 64 lb in 316 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e110 to 120V, 7.2A, 830W, single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch6\u003eBefore you order\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower.\u003c\/strong\u003e 7.2A on a standard socket, running continuously. Give it a circuit that is not shared with a high-draw appliance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo pump in the box.\u003c\/strong\u003e This is the chiller alone. A plunge build also needs a pump and tubing, and Penguin's own accessory pump package is not rated for cold therapy use. Tell us your tub and we will spec the pump before you order rather than after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSiting.\u003c\/strong\u003e Warm exhaust air and condensation. It wants ventilation and a surface that tolerates water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelivery.\u003c\/strong\u003e Ships free to the contiguous 48 states from Penguin's Tennessee factory.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eYou will also need a pump\u003c\/h6\u003e\n\u003cp\u003eA chiller does not circulate water on its own. It needs a pump to move water between the chiller and your plunge.\u003c\/p\u003e\n\u003cp\u003eWe recommend running the pump submersed. Submersed operation keeps the pump primed, runs quieter, and puts no load on the pump inlet. It can also be plumbed in line. If you do, hand-tighten the fitting at the inlet, do not force it, and support the weight of the pipework so it does not bear on the pump body. The inlet is the part most likely to be damaged by an over-tightened or unsupported fitting.\u003c\/p\u003e\n\n\u003ch6\u003eReturns and delivery\u003c\/h6\u003e\n\u003cp\u003eChange-of-mind returns accepted within \u003cstrong\u003e21 days of dispatch\u003c\/strong\u003e, subject to a \u003cstrong\u003e20% restocking fee\u003c\/strong\u003e, which is what Penguin Chillers charge us. Return freight is arranged by us and charged to you at cost, and you will have the exact figure in writing before anything is booked. Custom-configured units cannot be returned.\u003c\/p\u003e\n\u003cp\u003eDamage in transit and manufacturing defects are covered in full at our cost.\u003c\/p\u003e\n","brand":"Penguin Chillers","offers":[{"title":"PVC shell with titanium coil","offer_id":56189045375361,"sku":"PNG-WC1-TI","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"316 stainless shell and coil","offer_id":56189045408129,"sku":"PNG-WC1-316","price":2399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/5751\/7697\/files\/amber-ice-penguin-1-hp-water-chiller-front.jpg?v=1787940865"},{"product_id":"penguin-outdoor-half-hp-he-water-chiller","title":"Outdoor ½ HP High Efficiency Water Chiller","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\u003cp\u003e\u003cem\u003eThe one built to stay outside.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eSame 5,750 BTU\/hr as the indoor high efficiency unit, in a housing rated to live outdoors in weather. That is the whole difference, and it is why it weighs 49 lb rather than 40. If the plunge is in a garden and the chiller has nowhere sheltered to go, this is the one that survives.\u003c\/p\u003e\u003cp\u003eIt handles all conditions except freezing. Below 32°F ambient it has to be disconnected and drained, which is a genuine limitation in a cold winter rather than a formality, so plan for that before you commit to an outdoor install.\u003c\/p\u003e\u003ch6\u003eKey Features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor rated housing.\u003c\/strong\u003e Built for permanent outdoor siting above freezing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5,750 BTU\/hr.\u003c\/strong\u003e High efficiency coil, same capacity as the indoor HE unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110 to 120V, 3.9A.\u003c\/strong\u003e Standard socket. No supply upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital controller.\u003c\/strong\u003e Front mounted, sets and holds a target temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e49 lb.\u003c\/strong\u003e Freestanding, 16.25 in wide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Tennessee.\u003c\/strong\u003e Penguin builds these in Knoxville.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-year warranty.\u003c\/strong\u003e Manufacturer parts and labour cover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003e5,750 BTU\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat exchanger\u003c\/th\u003e\n\u003ctd\u003eHigh efficiency coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e16.25″ W × 14.75″ D × 12″ H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e49 lb, or 54 lb in 316 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e110 to 120V, 3.9A, 450W, single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutdoor rated\u003c\/th\u003e\n\u003ctd\u003eYes, above 32°F ambient\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch6\u003eBefore you order\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFreezing is the limit.\u003c\/strong\u003e Rated for all weather except freezing. If ambient drops to 32°F it must be disconnected and fully drained or it will be damaged. Think about that before an outdoor install in a cold state.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower outdoors.\u003c\/strong\u003e 3.9A on a standard socket, but the outlet itself needs to be a suitable outdoor circuit. That is an electrician's call, not ours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo pump in the box.\u003c\/strong\u003e This is the chiller alone. A plunge build also needs a pump and tubing, and Penguin's own accessory pump package is not rated for cold therapy use. Tell us your tub and we will spec the pump before you order rather than after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelivery.\u003c\/strong\u003e Ships free to the contiguous 48 states from Penguin's Tennessee factory.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eYou will also need a pump\u003c\/h6\u003e\n\u003cp\u003eA chiller does not circulate water on its own. It needs a pump to move water between the chiller and your plunge.\u003c\/p\u003e\n\u003cp\u003eWe recommend running the pump submersed. Submersed operation keeps the pump primed, runs quieter, and puts no load on the pump inlet. It can also be plumbed in line. If you do, hand-tighten the fitting at the inlet, do not force it, and support the weight of the pipework so it does not bear on the pump body. The inlet is the part most likely to be damaged by an over-tightened or unsupported fitting.\u003c\/p\u003e\n\n\u003ch6\u003eReturns and delivery\u003c\/h6\u003e\n\u003cp\u003eChange-of-mind returns accepted within \u003cstrong\u003e21 days of dispatch\u003c\/strong\u003e, subject to a \u003cstrong\u003e20% restocking fee\u003c\/strong\u003e, which is what Penguin Chillers charge us. Return freight is arranged by us and charged to you at cost, and you will have the exact figure in writing before anything is booked. Custom-configured units cannot be returned.\u003c\/p\u003e\n\u003cp\u003eDamage in transit and manufacturing defects are covered in full at our cost.\u003c\/p\u003e\n","brand":"Penguin Chillers","offers":[{"title":"Default Title","offer_id":56189045440897,"sku":"PNG-WCHE05OUT","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/5751\/7697\/files\/amber-ice-penguin-outdoor-half-hp-he-water-chiller-front.webp?v=1787940877"},{"product_id":"penguin-half-hp-he-water-chiller","title":"½ HP High Efficiency Water Chiller, 5,750 BTU","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\u003cp\u003e\u003cem\u003eA bigger coil on the same compressor, for $100.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e5,750 BTU\/hr against the standard ½ HP's 5,000, from an identical 3.9A draw in an identical cabinet. The gain is entirely in a larger titanium or 316 coil, and at a hundred dollars over the standard unit it is the easiest upgrade decision in the range.\u003c\/p\u003e\u003cp\u003eSuited to a smaller tub, roughly 80 to 100 gallons, or to a well insulated one that is not fighting much heat gain. If the tub is larger or sits in the sun, go up to a 1 HP rather than expecting this to hold the temperature.\u003c\/p\u003e\u003ch6\u003eKey Features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5,750 BTU\/hr.\u003c\/strong\u003e 15 percent more than the standard ½ HP on the same power draw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarger coil.\u003c\/strong\u003e Titanium or 316 stainless, both bigger than the standard unit's.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110 to 120V, 3.9A.\u003c\/strong\u003e Standard socket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 lb.\u003c\/strong\u003e The lightest chiller in the range, 16.25 in wide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital controller.\u003c\/strong\u003e Front mounted, sets and holds a target temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Tennessee.\u003c\/strong\u003e Penguin builds these in Knoxville.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-year warranty.\u003c\/strong\u003e Manufacturer parts and labour cover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003e5,750 BTU\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat exchanger\u003c\/th\u003e\n\u003ctd\u003ePVC with titanium coil, or 316 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e16.25″ W × 14.75″ D × 12″ H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e40 lb, or 44 lb in 316 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e110 to 120V, 3.9A, 450W, single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch6\u003eBefore you order\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize it honestly.\u003c\/strong\u003e Good for roughly 80 to 100 gallons. On a bigger or sun-exposed tub it will run constantly and still not hold the number you want. Send us the volume and we will say if it is enough.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo pump in the box.\u003c\/strong\u003e This is the chiller alone. A plunge build also needs a pump and tubing, and Penguin's own accessory pump package is not rated for cold therapy use. Tell us your tub and we will spec the pump before you order rather than after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower.\u003c\/strong\u003e 3.9A on a standard socket. Not on an extension lead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelivery.\u003c\/strong\u003e Ships free to the contiguous 48 states from Penguin's Tennessee factory.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eYou will also need a pump\u003c\/h6\u003e\n\u003cp\u003eA chiller does not circulate water on its own. It needs a pump to move water between the chiller and your plunge.\u003c\/p\u003e\n\u003cp\u003eWe recommend running the pump submersed. Submersed operation keeps the pump primed, runs quieter, and puts no load on the pump inlet. It can also be plumbed in line. If you do, hand-tighten the fitting at the inlet, do not force it, and support the weight of the pipework so it does not bear on the pump body. The inlet is the part most likely to be damaged by an over-tightened or unsupported fitting.\u003c\/p\u003e\n\n\u003ch6\u003eReturns and delivery\u003c\/h6\u003e\n\u003cp\u003eChange-of-mind returns accepted within \u003cstrong\u003e21 days of dispatch\u003c\/strong\u003e, subject to a \u003cstrong\u003e20% restocking fee\u003c\/strong\u003e, which is what Penguin Chillers charge us. Return freight is arranged by us and charged to you at cost, and you will have the exact figure in writing before anything is booked. Custom-configured units cannot be returned.\u003c\/p\u003e\n\u003cp\u003eDamage in transit and manufacturing defects are covered in full at our cost.\u003c\/p\u003e\n","brand":"Penguin Chillers","offers":[{"title":"PVC shell with titanium coil","offer_id":56189045473665,"sku":"PNG-WCHE05-TI","price":1199.0,"currency_code":"USD","in_stock":true},{"title":"316 stainless shell and coil","offer_id":56189045506433,"sku":"PNG-WCHE05-316","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/5751\/7697\/files\/amber-ice-penguin-half-hp-he-water-chiller-front.jpg?v=1787940863"},{"product_id":"circulation-pump-for-cold-plunge-and-chiller","title":"Circulation Pump for Cold Plunge and Chiller","description":"\u003cp\u003eSupreme® Aqua-Mag magnetic drive pumps, used to circulate water between your plunge and your chiller. One moving part, no seals to fail, and rated for continuous duty in fresh or salt water.\u003c\/p\u003e\n\u003cp\u003eChoose the flow rate to match your chiller and tubing run. As a rule, a longer run and a larger chiller need more flow.\u003c\/p\u003e\n\u003ch3\u003eWhich size\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDanner 5, 500 gph\u003c\/strong\u003e — small tubs and short runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDanner 9.5, 950 gph\u003c\/strong\u003e — the common choice for a single plunge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDanner 18, 1800 gph\u003c\/strong\u003e — larger tubs, longer runs, or higher-output chillers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDanner 24, 2400 gph\u003c\/strong\u003e — high flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDanner 36, 3600 gph\u003c\/strong\u003e — maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePump placement\u003c\/h3\u003e\n\u003cp\u003eThis pump is designed to run submersed, and that is how we recommend installing it in a cold plunge. Running it submersed keeps the pump primed, runs quieter, and puts no load on the inlet.\u003c\/p\u003e\n\u003cp\u003eIt can also be plumbed in line. If you do, take care at the inlet: hand-tighten the fitting, do not force it, and support the weight of the pipework so it does not bear on the pump body. The inlet is the part most likely to be damaged by an over-tightened or unsupported fitting.\u003c\/p\u003e\n\u003cp\u003eBarbed adapter fittings are sized to the pump and tubing. Check the fitting guide before ordering tubing.\u003c\/p\u003e\n\u003ch6\u003eReturns and delivery\u003c\/h6\u003e\n\u003cp\u003eChange-of-mind returns accepted within \u003cstrong\u003e21 days of dispatch\u003c\/strong\u003e, subject to a \u003cstrong\u003e20% restocking fee\u003c\/strong\u003e, which is what Penguin Chillers charge us. Return freight is arranged by us and charged to you at cost, and you will have the exact figure in writing before anything is booked. Custom-configured units cannot be returned.\u003c\/p\u003e\n\u003cp\u003eDamage in transit and manufacturing defects are covered in full at our cost.\u003c\/p\u003e\n","brand":"Penguin Chillers","offers":[{"title":"Danner 5 (500 gph)","offer_id":56214841819521,"sku":"PNG-MAG5","price":139.99,"currency_code":"USD","in_stock":true},{"title":"Danner 9.5 (950 gph)","offer_id":56214841852289,"sku":"PNG-MAG95","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Danner 18 (1800 gph)","offer_id":56214841885057,"sku":"PNG-MAG18","price":284.99,"currency_code":"USD","in_stock":true},{"title":"Danner 24 (2400 gph)","offer_id":56214841917825,"sku":"PNG-MAG24","price":359.99,"currency_code":"USD","in_stock":true},{"title":"Danner 36 (3600 gph)","offer_id":56214841950593,"sku":"PNG-MAG36","price":444.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/5751\/7697\/files\/amber-ice-circulation-pump-range.png?v=1788448237"},{"product_id":"water-chiller-setup-package-pump-fittings-and-tubing","title":"Water Chiller Setup Package: Pump, Fittings and Tubing","description":"\u003cp\u003eEverything needed to connect a water chiller to your plunge in one package: a circulation pump, the barbed adapter fittings sized to that pump, and vinyl tubing cut to length. Buying the parts together avoids the most common setup problem, which is ordering a fitting that does not match the pump or the tubing.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing the pump\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDanner 5, 500 gph\u003c\/strong\u003e — small tubs and short runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDanner 9.5, 950 gph\u003c\/strong\u003e — the usual choice for a single plunge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDanner 18, 1800 gph\u003c\/strong\u003e — larger tubs, longer runs, or a higher-output chiller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eChoosing the tubing length\u003c\/h3\u003e\n\u003cp\u003eMeasure the actual route the tubing will take, not the straight-line distance, and allow slack for bends and for moving the chiller to service it. The length quoted covers the full run, so a chiller sited 8 ft away needs more than 16 ft once corners and slack are counted. If you are between sizes, take the longer one.\u003c\/p\u003e\n\n\u003ch3\u003ePump placement\u003c\/h3\u003e\n\u003cp\u003eWe recommend running the pump submersed. Submersed operation keeps the pump primed, runs quieter, and puts no load on the pump inlet.\u003c\/p\u003e\n\u003cp\u003eIt can also be plumbed in line. If you do, hand-tighten the fitting at the inlet, do not force it, and support the weight of the pipework so it does not bear on the pump body. The inlet is the part most likely to be damaged by an over-tightened or unsupported fitting.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is not included\u003c\/h3\u003e\n\u003cp\u003eThe chiller itself, and any glycol. This package is for standard water chillers. Glycol chillers use different tubing and a different pump.\u003c\/p\u003e\n\u003ch6\u003eReturns and delivery\u003c\/h6\u003e\n\u003cp\u003eChange-of-mind returns accepted within \u003cstrong\u003e21 days of dispatch\u003c\/strong\u003e, subject to a \u003cstrong\u003e20% restocking fee\u003c\/strong\u003e, which is what Penguin Chillers charge us. Return freight is arranged by us and charged to you at cost, and you will have the exact figure in writing before anything is booked. Custom-configured units cannot be returned.\u003c\/p\u003e\n\u003cp\u003eDamage in transit and manufacturing defects are covered in full at our cost.\u003c\/p\u003e\n","brand":"Penguin Chillers","offers":[{"title":"Danner 5 (500 gph) \/ 15 ft (3\/4\" ID)","offer_id":56214972039553,"sku":"PNG-KIT-MAG5-15","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Danner 5 (500 gph) \/ 25 ft (3\/4\" ID)","offer_id":56214972072321,"sku":"PNG-KIT-MAG5-25","price":199.99,"currency_code":"USD","in_stock":true},{"title":"Danner 5 (500 gph) \/ 35 ft (3\/4\" ID)","offer_id":56214972105089,"sku":"PNG-KIT-MAG5-35","price":224.99,"currency_code":"USD","in_stock":true},{"title":"Danner 5 (500 gph) \/ 45 ft (3\/4\" ID)","offer_id":56214972137857,"sku":"PNG-KIT-MAG5-45","price":244.99,"currency_code":"USD","in_stock":true},{"title":"Danner 9.5 (950 gph) \/ 15 ft (3\/4\" ID)","offer_id":56214972170625,"sku":"PNG-KIT-MAG95-15","price":214.99,"currency_code":"USD","in_stock":true},{"title":"Danner 9.5 (950 gph) \/ 25 ft (3\/4\" ID)","offer_id":56214972203393,"sku":"PNG-KIT-MAG95-25","price":236.99,"currency_code":"USD","in_stock":true},{"title":"Danner 9.5 (950 gph) \/ 35 ft (3\/4\" ID)","offer_id":56214972236161,"sku":"PNG-KIT-MAG95-35","price":258.99,"currency_code":"USD","in_stock":true},{"title":"Danner 9.5 (950 gph) \/ 45 ft (3\/4\" ID)","offer_id":56214972268929,"sku":"PNG-KIT-MAG95-45","price":280.99,"currency_code":"USD","in_stock":true},{"title":"Danner 18 (1800 gph) \/ 15 ft (3\/4\" ID)","offer_id":56214972301697,"sku":"PNG-KIT-MAG18-15","price":307.99,"currency_code":"USD","in_stock":true},{"title":"Danner 18 (1800 gph) \/ 25 ft (3\/4\" ID)","offer_id":56214972334465,"sku":"PNG-KIT-MAG18-25","price":329.99,"currency_code":"USD","in_stock":true},{"title":"Danner 18 (1800 gph) \/ 35 ft (3\/4\" ID)","offer_id":56214972367233,"sku":"PNG-KIT-MAG18-35","price":351.99,"currency_code":"USD","in_stock":true},{"title":"Danner 18 (1800 gph) \/ 45 ft (3\/4\" ID)","offer_id":56214972400001,"sku":"PNG-KIT-MAG18-45","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/5751\/7697\/files\/amber-ice-chiller-setup-package.png?v=1788448237"},{"product_id":"lumina-cold-plunge-dual-chiller-and-heater-1-hp","title":"Lumina Cold Plunge Dual Chiller and Heater – 1 HP","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\u003cp\u003e\u003cem\u003eBuilt for outdoor use.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eEnhance your wellness routine with our advanced Cold Plunge and Heating Chiller, featuring a powerful 1 HP motor for rapid water temperature control. This versatile unit not only cools water down to an invigorating 35.6\u0026amp;deg;F but also heats it up to a steaming 107\u0026amp;deg;F, offering a full spectrum of therapeutic benefits from cold therapy to soothing relaxation.\u003c\/p\u003e\u003cp\u003erated for indoor and outdoor installation. Assembly is done on site, and it ships free by curbside freight anywhere in the contiguous United States.\u003c\/p\u003e\u003ch6\u003eKey Features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 HP.\u003c\/li\u003e\n\u003cli\u003eFor cold plunges and hot tubs.\u003c\/li\u003e\n\u003cli\u003e35.6\u0026amp;deg;F - 107\u0026amp;deg;F temperature range.\u003c\/li\u003e\n\u003cli\u003eIndoor and outdoor use.\u003c\/li\u003e\n\u003cli\u003eWi-Fi control.\u003c\/li\u003e\n\u003cli\u003eTouchscreen digital display.\u003c\/li\u003e\n\u003cli\u003eOzone sanitation.\u003c\/li\u003e\n\u003cli\u003eProgrammable timer.\u003c\/li\u003e\n\u003cli\u003eBuilt-in water pump.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSpecifications\u003c\/h6\u003e\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e1 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCooling Minimum Temperature\u003c\/th\u003e\n\u003ctd\u003e35.6\u0026amp;deg;F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeating Maximum Temperature\u003c\/th\u003e\n\u003ctd\u003e107\u0026amp;deg;F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise Level\u003c\/th\u003e\n\u003ctd\u003e58 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIndoor\/Outdoor Use\u003c\/th\u003e\n\u003ctd\u003eIndoor and Outdoor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCooling Capacity\u003c\/th\u003e\n\u003ctd\u003e3100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeating Capacity\u003c\/th\u003e\n\u003ctd\u003e3600W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Power\u003c\/th\u003e\n\u003ctd\u003e930W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTotal Current\u003c\/th\u003e\n\u003ctd\u003e5.8A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRefrigerant\u003c\/th\u003e\n\u003ctd\u003eR410A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e110V\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Max Water Volume\u003c\/th\u003e\n\u003ctd\u003e132-Gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmbient Operating Temperature\u003c\/th\u003e\n\u003ctd\u003e23\u0026amp;deg;F - +104\u0026amp;deg;F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWi-Fi\u003c\/th\u003e\n\u003ctd\u003e2.4 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOzone Sanitation\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eMatte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e20.5L x 13.5W x 20.5H in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e77.16 lbs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Includes\u003c\/th\u003e\n\u003ctd\u003e(1) Chiller; (2) Water Hoses; (1) Paper Filter; (1) Hair Cutting Filter; (1) Pack of Rubber Sealing Rings; (1) Wrench\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAssembly Required\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1-Year Limited Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch6\u003eBefore you order\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase.\u003c\/strong\u003e Roughly 77.16 lbs. assembled. It needs a level, load-bearing base such as a slab, deck or gravel pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly.\u003c\/strong\u003e Supplied as a kit for self-assembly. Two people and a few hours is the realistic expectation, not one person and an afternoon.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelivery is kerbside only.\u003c\/strong\u003e The driver unloads at the end of your driveway and goes. Arrange help to move it into place.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eShipping and delivery\u003c\/h6\u003e\n\u003cp\u003eFree curbside freight delivery to the contiguous United States. A residential or business address is required, and we cannot deliver to PO Boxes.\u003c\/p\u003e\n\u003cp\u003eThis item ships by LTL freight and typically arrives 7 to 20 business days after dispatch. The carrier contacts you to book a delivery window, and \u003cstrong\u003eyou must be present to receive it\u003c\/strong\u003e or the freight company may charge a redelivery fee. Curbside delivery does not include placement, unpacking, installation or removal of packaging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect before you sign.\u003c\/strong\u003e Note any visible damage to the crate on the delivery receipt, or refuse the delivery outright. If the crate looks sound, sign for it, then open and inspect the sauna \u003cstrong\u003ewithin 3 days\u003c\/strong\u003e. Concealed damage reported after that window cannot be claimed, so please do not leave the crate unopened.\u003c\/p\u003e\u003ch6\u003eReturns and warranty\u003c\/h6\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns\u003c\/strong\u003e from the date of delivery. Contact us for a Return Merchant Authorization number before sending anything back.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDamaged or faulty on arrival.\u003c\/strong\u003e Replacement parts are supplied at no cost and dispatched within 48 hours. If the unit cannot be put right, you are entitled to a replacement, a full refund or store credit. No restocking fee applies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChange of mind.\u003c\/strong\u003e The sauna must be unused and in its original condition. Return shipping is the customer's responsibility, and a 15% restocking fee applies to anything not returned in original condition. Refunds are processed within 2 to 5 business days of receipt.\u003c\/p\u003e\n\u003cp\u003eCovered by a \u003cstrong\u003e1 year limited warranty\u003c\/strong\u003e against manufacturing defects. Not sure about access, base or electrical supply? Email \u003ca href=\"mailto:sales@amberandice.com\"\u003esales@amberandice.com\u003c\/a\u003e before you order and we will work through it with you.\u003c\/p\u003e","brand":"ALEKO","offers":[{"title":"Default Title","offer_id":56242880250241,"sku":"CHILL1BLK-AP","price":2699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/5751\/7697\/files\/CHILL1BLK_01__73721.1727299557.jpg?v=1789043448"}],"url":"https:\/\/amberandice.com\/collections\/chillers\/compact.oembed","provider":"Amber \u0026 Ice","version":"1.0","type":"link"}