Barrel Chiller Cold Therapy Package

Description

For a barrel you already own. The barrel is not in the box.

The same 7,500 BTU Cold Therapy Chiller, supplied with the bracket, hoses and fittings that attach it to an Ice Barrel. If you already have the barrel, this is the cheapest route to a plunge that holds temperature without ice runs.

Two kits exist because the barrel sizes differ. Pick the 300 or 500 kit, or the 400 kit, to match what you own. Getting this wrong means fittings that do not seat, so check the model number on your barrel before you order rather than after.

Key Features

• 7,500 BTU/hr chiller. Titanium coil with the pump built in.
• Barrel mounting hardware. Bracket, hoses and quick connect fittings included.
• Two kit options. 300 or 500, and 400. Match it to the barrel you own.
• 150 micron filter. Washable and reusable.
• Plug and play. No tools needed for the connections.
• Outdoor rated. Above 32°F ambient.
• 110 to 120V, 3.9A. Standard socket, 6 ft cord.
• One-year warranty. Manufacturer parts and labour cover.

Specifications

Before you order

• The barrel is not included. This is the chiller and the hardware to connect it. You supply the Ice Barrel.
• Check your barrel model first. The 300/500 kit and the 400 kit use different fittings. Tell us the model if you are unsure and we will confirm before the order goes in.
• Power. 110 to 120V, 3.9A on a 6 ft cord. Not on an extension lead.
• Siting. Condensation is normal. Site it where water will not do damage.
• Freezing. Rated above 32°F. Disconnect and drain it below that.

You will also need a pump

A chiller does not circulate water on its own. It needs a pump to move water between the chiller and your plunge.

We recommend running the pump submersed. Submersed operation keeps the pump primed, runs quieter, and puts no load on the pump inlet. It can also be plumbed in line. If you do, hand-tighten the fitting at the inlet, do not force it, and support the weight of the pipework so it does not bear on the pump body. The inlet is the part most likely to be damaged by an over-tightened or unsupported fitting.

Returns and delivery

Change-of-mind returns accepted within 21 days of shipping, subject to a 20% restocking fee, which is what Penguin Chillers charge us. Return freight is arranged by us and charged to you at cost, and you will have the exact figure in writing before anything is booked. Custom-configured units cannot be returned.

Damage in transit and manufacturing defects are covered in full at our cost.